{"product_id":"hearthstone-stoves-clydesdale-wood-fireplace-insert","title":"Hearthstone Stoves Clydesdale Wood Fireplace Insert","description":"\u003ch2\u003eCast Iron Wood Fireplace Insert with a Soapstone-Lined Firebox, TruHybrid™ Catalytic Combustion, and an Included Blower and Surround\u003c\/h2\u003e\n\u003cp\u003eFull cast iron construction with a soapstone-lined firebox, TruHybrid™ catalytic combustion, a factory-installed blower, an included cast iron surround, and a published HeatLife™ of up to 24 hours.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTruHybrid™ combustion system combining primary and secondary combustion with catalytic tertiary combustion\u003c\/li\u003e\n\u003cli\u003eEPA certified at 1.16 g\/hr particulate emissions under the 2015 EPA particulate standard and approved for sale after May 15, 2020, tested to EPA Methods 28, 28A, and 5H\u003c\/li\u003e\n\u003cli\u003e79% HHV weighted-average efficiency, measured across four burn-rate categories using EPA Method 28R and CSA B415-10 methodology\u003c\/li\u003e\n\u003cli\u003ePublished HeatLife™ of up to 24 hours, depending on wood, draft, and operating conditions\u003c\/li\u003e\n\u003cli\u003eFull cast iron construction with a soapstone-lined firebox for gradual radiant heat\u003c\/li\u003e\n\u003cli\u003eGenerous firebox accepts logs up to 22\" (55.9 cm), with 2.4 cubic feet of capacity\u003c\/li\u003e\n\u003cli\u003eShips complete with a factory-installed blower and a cast iron surround kit\u003c\/li\u003e\n\u003cli\u003eHeats up to 2,000 square feet, depending on insulation, floor plan, and fuel quality\u003c\/li\u003e\n\u003cli\u003eTwo current finishes: Matte Black and Brown Enamel\u003c\/li\u003e\n\u003cli\u003eRequires a continuous, listed 6\" stainless steel chimney liner extending the full length of the chimney\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003ch4\u003eFireplace Integration\u003c\/h4\u003e\n\u003cp\u003eThe Clydesdale 8492 installs into a masonry fireplace built to NFPA 211 standards, with a sealed block-off plate or plug of noncombustible material at the damper area to seal the chimney from room air. The current owner's manual states the insert should not be installed in a factory-built fireplace. A continuous chimney liner with a minimum diameter of 6\" must extend from the insert to the top of the chimney, conforming to the class 3 requirements of chimney liner standards ULC-S635 or ULC-S640, connected positively to the insert's flue collar. The flue collar can be installed vertically or at 30 degrees to suit the position of the liner within the fireplace.\u003c\/p\u003e\n\u003ch4\u003eIncluded Blower\u003c\/h4\u003e\n\u003cp\u003eThe convection blower is factory installed within the front ash lip and runs only when the insert is hot. A speed control wheel in the bottom center of the ash lip adjusts the blower, and the power cord can be routed to the left or right side of the insert during installation.\u003c\/p\u003e\n\u003ch4\u003eIncluded Surround\u003c\/h4\u003e\n\u003cp\u003eA cast iron surround kit ships on top of the insert, with surround panels, assembly hardware, and a surround mounting bracket. An optional surround extension covers an additional 6 inches of space beyond the standard surround, and optional cast iron surround base caps continue the lines of the ash lip and attach with magnets.\u003c\/p\u003e\n\u003ch4\u003eFirebox and Combustion\u003c\/h4\u003e\n\u003cp\u003eThe firebox is lined with soapstone refractory bricks that absorb the heat of the fire and release it gradually. Above the secondary air tube, HearthStone's Thermo-Ceramic baffle system maintains high temperatures in the secondary combustion area, and two Applied Ceramics ACI-6M2 catalytic combustors provide tertiary combustion. A bypass door directs combustion products around the catalysts during startup and reloading, and a catalyst thermometer indicates the active range; the Clydesdale typically operates in the 800°F to 1300°F range.\u003c\/p\u003e\n\u003ch4\u003eLoading and Fire Viewing\u003c\/h4\u003e\n\u003cp\u003eThe generous firebox depth and width allows loading of wood up to 22 inches long through a 22\" wide by 11.5\" high front door, and the large glass window presents an open view of the fire. The front door is reversible so it can be hinged on either the left or the right side.\u003c\/p\u003e\n\u003ch3\u003eAvailable Finishes and Configurations\u003c\/h3\u003e\n\u003cp\u003eThe Clydesdale 8492 is currently orderable in two finishes, and every unit ships complete with the blower and surround. Pricing varies by finish.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003cth\u003ePart ID\u003c\/th\u003e\n\u003cth\u003eMSRP\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack Matte\u003c\/td\u003e\n\u003ctd\u003e8492-0010\u003c\/td\u003e\n\u003ctd\u003e$5,699\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrown Enamel\u003c\/td\u003e\n\u003ctd\u003e8492-0020\u003c\/td\u003e\n\u003ctd\u003e$6,199\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePricing notice:\u003c\/strong\u003e Prices shown are current manufacturer-suggested retail prices for the insert in the selected finish, shipped complete with blower and surround. Chimney liner components, hearth protection, accessories, delivery, installation, and applicable taxes are additional.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch4\u003ePerformance\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e8492\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCombustion system\u003c\/th\u003e\n\u003ctd\u003eTruHybrid™ — primary, secondary, and catalytic tertiary combustion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalytic combustor\u003c\/th\u003e\n\u003ctd\u003eApplied Ceramics ACI-6M2, two required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating area\u003c\/th\u003e\n\u003ctd\u003eUp to 2,000 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum heat output\u003c\/th\u003e\n\u003ctd\u003e60,000 BTU per hour of cordwood, based on independent laboratory test results\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTested heat output range\u003c\/th\u003e\n\u003ctd\u003e14,829 to 32,588 BTU (output) under specific test conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeatLife™\u003c\/th\u003e\n\u003ctd\u003eUp to 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalyst operating range\u003c\/th\u003e\n\u003ctd\u003eTypically 800°F to 1300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eFirebox and Fuel\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel type\u003c\/th\u003e\n\u003ctd\u003eNatural cordwood only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirebox capacity\u003c\/th\u003e\n\u003ctd\u003e2.4 cu ft, or 48 pounds of wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e22\" (55.88 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront door size\u003c\/th\u003e\n\u003ctd\u003e22\" wide x 11.5\" high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlower\u003c\/th\u003e\n\u003ctd\u003eIncluded, factory installed with speed control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eDimensions and Weight\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e31.38\" (80.31 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e24.81\" (63 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e23.12\" (58.72 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eActual weight\u003c\/th\u003e\n\u003ctd\u003e550 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCastings finish\u003c\/th\u003e\n\u003ctd\u003ePainted matte or porcelain enamel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eFireplace and Surround Requirements\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum fireplace opening\u003c\/th\u003e\n\u003ctd\u003e32½\" wide x 23¼\" high x 13\" deep; the fireplace may taper to 27\" wide x 21\" high at the back wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurround coverage\u003c\/th\u003e\n\u003ctd\u003e47⅛\" wide x 30⅝\" high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurround extension\u003c\/th\u003e\n\u003ctd\u003eOptional kit 94-5990010, 59\" x 36\", extends coverage into the room\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eFlue and Installation\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue exit\u003c\/th\u003e\n\u003ctd\u003eTop exit only; flue collar installable vertically or at 30 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChimney liner size\u003c\/th\u003e\n\u003ctd\u003e6\" (152 mm) diameter, continuous from insert to the top of the chimney\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLiner standard\u003c\/th\u003e\n\u003ctd\u003eListed liner meeting class 3 requirements of ULC-S635 or ULC-S640; listed 6\" stainless steel flexible connector to a listed 6\" stainless steel liner in masonry chimneys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMasonry chimney requirement\u003c\/th\u003e\n\u003ctd\u003eLined chimney with walls at least 4\" (102 mm) thick; 6\" (15.2 cm) round flue or 8\" x 8\" (20 x 20 cm) square flue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum chimney height\u003c\/th\u003e\n\u003ctd\u003e13 feet (4 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended maximum chimney height\u003c\/th\u003e\n\u003ctd\u003e30 feet (9 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDamper area\u003c\/th\u003e\n\u003ctd\u003eSealed block-off plate or plug of noncombustible material required to seal the chimney from room air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eEfficiency, Emissions, and Certification\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHHV efficiency\u003c\/th\u003e\n\u003ctd\u003e79% weighted average across four burn-rate categories, measured using EPA Method 28R and CSA B415-10 methodology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eParticulate emissions\u003c\/th\u003e\n\u003ctd\u003e1.16 g\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEPA certification\u003c\/th\u003e\n\u003ctd\u003eTested to EPA Methods 28, 28A, and 5H, 40 CFR Part 60; certified to comply with the U.S. EPA 2015 particulate emissions standard and approved for sale after May 15, 2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertification report\u003c\/th\u003e\n\u003ctd\u003ePFS Report F20-631\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCO emissions by burn category\u003c\/th\u003e\n\u003ctd\u003eCategory 1 0.56 g\/hr, Category 2 1.26 g\/hr, Category 3 0.79 g\/hr, Category 4 1.79 g\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTested standards\u003c\/th\u003e\n\u003ctd\u003eConforms to UL Std. 1482-2022; conforms to ULC Std. S628-93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eClearances and Hearth Requirements\u003c\/h3\u003e\n\u003cp\u003eThe values below are from the current Clydesdale 8492 owner's and installation manual (revision 3\/14\/24) and the current HearthStone Clydesdale product page. The masonry fireplace must be built to NFPA 211 standards. Minimum fireplace dimensions shown are from the current HearthStone Clydesdale product page; the minimum fireplace dimensions figure in the current owner's manual governs installation and must be verified against the printed manual before installation. The mantel shield, kit 94-79700, is available to achieve shielded mantel clearances.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation Configuration\u003c\/th\u003e\n\u003cth\u003eMeasurement\u003c\/th\u003e\n\u003cth\u003eRequired Clearance or Dimension\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll installations\u003c\/td\u003e\n\u003ctd\u003eMinimum fireplace opening\u003c\/td\u003e\n\u003ctd\u003e32½\" wide x 23¼\" high x 13\" deep; may taper to 27\" wide x 21\" high at the back wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombustible mantel, 8\" deep\u003c\/td\u003e\n\u003ctd\u003eFrom the bottom of the insert to the mantel\u003c\/td\u003e\n\u003ctd\u003e39½\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShielded mantel with kit 94-79700, 8\" deep\u003c\/td\u003e\n\u003ctd\u003eFrom the bottom of the insert to the mantel\u003c\/td\u003e\n\u003ctd\u003e33⅜\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll installations\u003c\/td\u003e\n\u003ctd\u003eTo side trim, from the side of the insert body\u003c\/td\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll installations\u003c\/td\u003e\n\u003ctd\u003eTo side wall, from the side of the insert body\u003c\/td\u003e\n\u003ctd\u003e11\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHearth and floor protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCombustible flooring must be protected with a covering of noncombustible material such as slate or marble tile. Insulation below the noncombustible material must be R1.5, or the bottom of the insert must be installed a minimum of 7\" above hearth protection with R0 insulation (13.25\" if measured from the bottom of the fuel loading opening). Masonry hearths 7\" or higher require ember protection only.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry\u003c\/th\u003e\n\u003cth\u003eMinimum Hearth Extension\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003ctd\u003e38\" x 16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003ctd\u003e47\" x 18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eHearthStone notes that luxury vinyl plank and luxury vinyl tile flooring warrants extra consideration, as some products begin to warp at 110° Fahrenheit, and that additional shielding may be necessary depending on the flooring used. Clearances to combustible surfaces may be reduced using an NFPA 211 approved wall protection system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation notice:\u003c\/strong\u003e Clearances and hearth requirements vary by fireplace construction, mantel depth, shielding, and installation configuration. Refer to the current Clydesdale 8492 installation manual and applicable local requirements before installation.\u003c\/p\u003e\n\u003ch3\u003eIncluded Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClydesdale 8492 fireplace insert with façade and ash lip with factory-installed blower\u003c\/li\u003e\n\u003cli\u003eFaçade top grill, in place on the insert\u003c\/li\u003e\n\u003cli\u003eTwo catalytic combustors, shipped in the firebox\u003c\/li\u003e\n\u003cli\u003eCast iron surround kit, shipped on top of the insert\u003c\/li\u003e\n\u003cli\u003eRefractory soapstone kit, two boxes\u003c\/li\u003e\n\u003cli\u003eWood handle kit with two handles and two screws\u003c\/li\u003e\n\u003cli\u003eOwner's manual packet\u003c\/li\u003e\n\u003cli\u003eTouch-up paint pouch, enamel finishes only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Accessories\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eAccessory\u003c\/th\u003e\n\u003cth\u003ePart ID\u003c\/th\u003e\n\u003cth\u003eMSRP\u003c\/th\u003e\n\u003cth\u003eCompatibility or Requirement Note\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Base Cap Set, Matte\u003c\/td\u003e\n\u003ctd\u003e94-5970610\u003c\/td\u003e\n\u003ctd\u003e$139\u003c\/td\u003e\n\u003ctd\u003eFor the Clydesdale; cast iron caps attach to the surround with magnets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Base Cap Set, Brown\u003c\/td\u003e\n\u003ctd\u003e94-5970620\u003c\/td\u003e\n\u003ctd\u003e$169\u003c\/td\u003e\n\u003ctd\u003eFor the Clydesdale; cast iron caps attach to the surround with magnets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround Extension, 59\" x 36\"\u003c\/td\u003e\n\u003ctd\u003e94-5990010\u003c\/td\u003e\n\u003ctd\u003e$399\u003c\/td\u003e\n\u003ctd\u003eExtends surround coverage an additional 6 inches beyond the standard surround.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMantle Shield\u003c\/td\u003e\n\u003ctd\u003e94-79700\u003c\/td\u003e\n\u003ctd\u003e$239\u003c\/td\u003e\n\u003ctd\u003eAttaches to the bottom of a combustible mantel to achieve shielded mantel clearances; 48\" wide, can be cut to fit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll accessories listed above are optional and sold separately unless expressly stated otherwise. The blower and surround are included with the insert.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eHearthStone warrants the appliance to the original retail purchaser only, when purchased by that purchaser and installed by an authorized HearthStone dealer or their designated representative, against defects in material or workmanship. Coverage begins on the date of the original invoice and is not transferable to subsequent owners.\u003c\/p\u003e\n\u003cp\u003eWarranty periods differ by component. HearthStone defines the term \"Limited Lifetime\" as 10 years from the beginning of warranty coverage, and applies it to the stone, to cast iron not listed elsewhere, and to the clean-burning air supply system. Door handles and latches and steel components and the firebox carry a 5-year period. Appliance electrical components carry a 2-year period. Enamel finish against peeling or fading, glass, the ash grate, accessories, and all components not listed elsewhere carry a 1-year period. The catalytic combustors are covered directly by the combustor manufacturer, Applied Ceramics, under a separate limited warranty that provides free replacement within two years of purchase and prorated replacement pricing thereafter.\u003c\/p\u003e\n\u003cp\u003eHearthStone pays for warranty labor performed by an authorized dealer during the first year after the purchase date only when the appliance was installed by an authorized dealer or their designated representative; otherwise, and thereafter, labor is the purchaser's responsibility. Exclusions include over-firing, improper installation or operation, service by anyone other than an authorized dealer, use of unapproved fuels or components, water and corrosion damage, and normal wear parts such as paint, gaskets, baffles, refractory materials, ash grates, and glass. Surface and hairline cracks and scratches in the stone that do not affect operation or safety are excluded, and HearthStone's obligation does not extend to the appliance's ability to heat a desired space. Warranty registration is not required as a condition of coverage. Refer to the complete warranty in the current Clydesdale 8492 owner's manual for the full terms, conditions, and limitations.\u003c\/p\u003e\n\u003ch3\u003eAbout HearthStone\u003c\/h3\u003e\n\u003cp\u003eHearthStone Quality Home Heating Products builds wood- and gas-burning hearth appliances in Morrisville, Vermont, and has been building industry-leading products since 1978. Its stoves are handcrafted by Vermont craftsmen from materials including heating-grade soapstone, cast iron produced at the company's own foundry in Spain, precision-made steel, and engineered ceramics, and every HearthStone soapstone stove is signed by the stove builder. The company's TruHybrid™ system, used across its current wood stove line, adds catalytic tertiary combustion to primary and secondary combustion.\u003c\/p\u003e","brand":"Hearthstone Stoves","offers":[{"title":"Default Title","offer_id":53592140841236,"sku":"8492","price":5699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/9381\/2756\/files\/Clydesdale8492_black_201013.webp?v=1785897864","url":"https:\/\/cozyglowstoves.com\/products\/hearthstone-stoves-clydesdale-wood-fireplace-insert","provider":"Cozy Glow Stoves","version":"1.0","type":"link"}