{"product_id":"hearthstone-stoves-craftsbury-freestanding-wood-stove","title":"Hearthstone Stoves Craftsbury Freestanding Wood Stove","description":"\u003ch2\u003eCompact Cast Iron Heat with TruHybrid™ Catalytic Combustion and a Soapstone-Lined Firebox\u003c\/h2\u003e\n\u003cp\u003eSoapstone-lined cast iron construction from HearthStone's Spanish foundry, TruHybrid™ catalytic combustion, burn times of up to 16+ hours, and a compact footprint sized for a large room or small home.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTruHybrid™ combustion system combining primary and secondary combustion with catalytic tertiary combustion\u003c\/li\u003e\n\u003cli\u003eEPA certified at 1.07 g\/hr particulate emissions under the 2020 EPA particulate standard, tested with crib wood\u003c\/li\u003e\n\u003cli\u003e79% HHV weighted-average efficiency, measured across four burn-rate categories using EPA Method 28R and CSA B415-10 methodology\u003c\/li\u003e\n\u003cli\u003ePublished burn time of up to 16+ hours, with a HeatLife™ of up to 20 hours per the current owner's manual\u003c\/li\u003e\n\u003cli\u003eHigh-quality cast iron parts from HearthStone's own foundry in Spain, finished in matte paint or porcelain enamel, with a soapstone-lined firebox\u003c\/li\u003e\n\u003cli\u003e1.32 cubic foot firebox accepts logs up to 16\" in length\u003c\/li\u003e\n\u003cli\u003eHeats up to a maximum of 1,400 square feet, depending on insulation, floor plan, stove placement, and fuel quality\u003c\/li\u003e\n\u003cli\u003eThree current finishes: Black Matte, Brown Enamel, and Basil Enamel\u003c\/li\u003e\n\u003cli\u003e6\" flue collar, shipped in the top-exit configuration and convertible to direct rear exit per the owner's manual, with approval for U.S. mobile home installation when installed to the manufacturer's requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003ch4\u003eTruHybrid™ Combustion Technology\u003c\/h4\u003e\n\u003cp\u003eThe TruHybrid™ system burns the fuel, then the gases the wood releases, then routes the remaining exhaust through the catalysts for tertiary combustion. A bypass handle directs combustion products around the catalysts during startup and reloading, and through the catalysts once the catalyst thermometer shows the stove is in its active range. The Craftsbury uses Applied Ceramics ACI-6M2 catalytic combustors, installed as two cartridges, which require periodic inspection and eventual replacement. The catalysts become active around 500°F, and the Craftsbury typically operates in the 800°F to 1300°F catalyst temperature range. HearthStone states that a roaring fire produces no visible smoke from the chimney when the TruHybrid™ system is engaged and functioning.\u003c\/p\u003e\n\u003ch4\u003eCast Iron and Soapstone Construction\u003c\/h4\u003e\n\u003cp\u003eThe Craftsbury is constructed of high-quality cast iron parts produced at HearthStone's own foundry in Spain and is lined with soapstone blocks. Soapstone absorbs the heat of the fire and releases it gradually, warming objects in the room rather than only the air. HearthStone notes that soapstone requires gradual break-in fires so the natural moisture in the freshly quarried stone is driven out slowly, and that stone color may change and surface fractures may appear with use without affecting stove function. The enamel finishes are porcelain Majolica enamels, applied as molten glass fused to the iron; HearthStone notes that color variation and fine crazing lines are a normal, cosmetic part of this finish.\u003c\/p\u003e\n\u003ch4\u003eCompact Firebox\u003c\/h4\u003e\n\u003cp\u003eThe 1.32 cubic foot firebox accepts logs up to 16\" in length. HearthStone notes that the amount and weight of wood contained per cubic foot of firebox volume can vary from 10 to 25 pounds per cubic foot depending on the type of wood, moisture content, packing density, and other factors.\u003c\/p\u003e\n\u003ch4\u003eFire Viewing and Everyday Operation\u003c\/h4\u003e\n\u003cp\u003eA large glass window lets the fire be seen from a variety of locations in the room. A single primary air control lever below the ash lip regulates the burn rate, the bypass handle controls catalyst engagement, and a catalyst thermometer shows when the stove is in the active temperature range. The front door glass is a ceramic, thermal shock-resistant glass made specifically for use in woodstoves.\u003c\/p\u003e\n\u003ch4\u003eHeating Performance\u003c\/h4\u003e\n\u003cp\u003eHearthStone publishes a heating area of up to a maximum of 1,400 square feet and a maximum heat output of 40,000 BTU per hour of cordwood, based on independent laboratory test results. Under specific EPA test conditions, the Craftsbury 8392 has been shown to deliver heat at rates ranging from 13,900 to 31,600 BTU (output). HearthStone states in the current owner's manual that the Craftsbury should not be considered the primary heat source for a home, and that factors unique to a given house can reduce the square footage the stove will heat.\u003c\/p\u003e\n\u003ch3\u003eAvailable Finishes and Configurations\u003c\/h3\u003e\n\u003cp\u003eThe Craftsbury 8392 is currently orderable in three finishes. Pricing varies by finish.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003cth\u003ePart ID\u003c\/th\u003e\n\u003cth\u003eMSRP\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack Matte\u003c\/td\u003e\n\u003ctd\u003e8392-0010\u003c\/td\u003e\n\u003ctd\u003e$3,599\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrown Enamel\u003c\/td\u003e\n\u003ctd\u003e8392-0020\u003c\/td\u003e\n\u003ctd\u003e$4,299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasil Enamel\u003c\/td\u003e\n\u003ctd\u003e8392-0083\u003c\/td\u003e\n\u003ctd\u003e$4,299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePricing notice:\u003c\/strong\u003e Prices shown are current manufacturer-suggested retail prices for the stove in the selected finish. Chimney components, hearth protection, accessories, delivery, installation, and applicable taxes are additional.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch4\u003ePerformance\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e8392\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCombustion system\u003c\/th\u003e\n\u003ctd\u003eTruHybrid™ — primary, secondary, and catalytic tertiary combustion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalytic combustor\u003c\/th\u003e\n\u003ctd\u003eApplied Ceramics ACI-6M2, two cartridges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating area\u003c\/th\u003e\n\u003ctd\u003eUp to a maximum of 1,400 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum heat output\u003c\/th\u003e\n\u003ctd\u003e40,000 BTU per hour of cordwood, based on independent laboratory test results\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTested heat output range\u003c\/th\u003e\n\u003ctd\u003e13,900 to 31,600 BTU (output) under specific test conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBurn time\u003c\/th\u003e\n\u003ctd\u003eUp to 16+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeatLife™\u003c\/th\u003e\n\u003ctd\u003eUp to 20 hours, per the current owner's manual (revision 1\/6\/2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical catalyst operating range\u003c\/th\u003e\n\u003ctd\u003e800°F to 1300°F, with catalyst activation around 500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eFirebox and Fuel\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel type\u003c\/th\u003e\n\u003ctd\u003eNatural cordwood only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirebox capacity\u003c\/th\u003e\n\u003ctd\u003e1.32 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003eUp to 16\" (40.6 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eDimensions and Weight\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e30½\" (77.2 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e23¾\" (59.1 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e19⅜\" (49.2 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e350 lbs (159 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrate dimensions\u003c\/th\u003e\n\u003ctd\u003eH 40\" x W 29\" x L 36\" (102 x 74 x 92 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eFlue and Installation\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue exit location\u003c\/th\u003e\n\u003ctd\u003eTop or rear; shipped in the top (vertical) configuration, convertible to direct rear exit per the owner's manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue collar and connector size\u003c\/th\u003e\n\u003ctd\u003e6\" (152 mm) diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMetal chimney requirement\u003c\/th\u003e\n\u003ctd\u003e6\" (152 mm) inside diameter, listed Type HT (2100°F) per UL 103 or ULC S629\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMasonry chimney requirement\u003c\/th\u003e\n\u003ctd\u003eCode-approved lined chimney, 6\" (152 mm) round flue or 8\" x 8\" (203 x 203 mm) square flue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended minimum chimney height, top exit\u003c\/th\u003e\n\u003ctd\u003e16 feet (4.9 m) off the floor, or 13 feet 7¼\" (4.3 m) from the top of the stove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum chimney height, rear exit\u003c\/th\u003e\n\u003ctd\u003e15 feet minimum; 19 feet (5.8 m) off the floor recommended, or 16 feet 7¼\" (5.2 m) from the top of the stove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended maximum chimney height\u003c\/th\u003e\n\u003ctd\u003e30 feet (9 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired draft\u003c\/th\u003e\n\u003ctd\u003e-0.06\" to -0.1\" water column; drafts beyond -0.1\" WC require a stovepipe damper; direct rear exit requires a minimum draft of -0.08\" WC, checked at installation time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside air connection\u003c\/th\u003e\n\u003ctd\u003eOptional kit 96-53400, minimum 3\" (76 mm) diameter duct supplied by others; optional adapter 90-53308 for 4\" duct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobile home approval\u003c\/th\u003e\n\u003ctd\u003eApproved for U.S. manufactured home installation per 24 CFR Part 3280; an outside air kit, permanent floor attachment, a listed mobile home chimney and connector kit per UL 103 or ULC S629, and a spark arrester are required; not for installation in a sleeping room\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFactory-built fireplaces\u003c\/th\u003e\n\u003ctd\u003eThe Craftsbury is a freestanding room heater and is not to be installed in any factory-built fireplace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eRear-Flue Conversion\u003c\/h4\u003e\n\u003cp\u003eThe Craftsbury ships in the vertical, top-flue configuration and may be installed with a direct rear flue. Converting to the rear-exit configuration requires switching the positions of the flue collar and the flue plate and modifying the included rear heat shield by removing a section so the pipe can pass through it, following the steps in the owner's manual. In the rear-exit configuration a draft of -0.08\" WC or more is necessary to ensure proper function of the stove, and the minimum chimney height is 15 feet; HearthStone recommends a minimum chimney height of 19 feet off the floor for rear-exit connections. Do not install the stove in the rear-exit configuration if the installation does not have sufficient draft.\u003c\/p\u003e\n\u003ch4\u003eEfficiency, Emissions, and Certification\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHHV efficiency\u003c\/th\u003e\n\u003ctd\u003e79% weighted average across four burn-rate categories, measured using EPA Method 28R and CSA B415-10 methodology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eParticulate emissions\u003c\/th\u003e\n\u003ctd\u003e1.07 g\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEPA certification\u003c\/th\u003e\n\u003ctd\u003eCertified to comply with the U.S. EPA 2020 particulate emissions standard, tested to EPA Method 28R, 40 CFR Part 60 where applicable, using crib wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertification report\u003c\/th\u003e\n\u003ctd\u003ePFS Report F17-183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCO emissions by burn category\u003c\/th\u003e\n\u003ctd\u003eCategory 1 (low) 40.7 g\/hr, Category 2 (medium low) 16.3 g\/hr, Category 3 (medium high) 8.6 g\/hr, Category 4 60.1 g\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTested standards\u003c\/th\u003e\n\u003ctd\u003eConforms to UL Std. 1482-2022; certified to ULC Std. S627-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eClearances and Hearth Requirements\u003c\/h3\u003e\n\u003cp\u003eThe values below are from the current Craftsbury 8392 owner's and installation manual (revision 1\/6\/2023). Dimensions are measured from the furthest point on the cast body of the stove unless otherwise indicated. The Craftsbury ships with a rear heat shield included; the optional blower kit 96-57400 supplies its own reduced-clearance heat shield, and the manual's clearance tables list these two shield configurations separately. Double-wall connector figures shown by HearthStone are specific to Simpson DuraVent DVL and may vary with other brands; check the specifications from the manufacturer of your connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParallel and corner installation clearances\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation Configuration\u003c\/th\u003e\n\u003cth\u003eStove body to side wall (A)\u003c\/th\u003e\n\u003cth\u003eStove body to rear wall (B)\u003c\/th\u003e\n\u003cth\u003eChimney connector to rear wall (C)\u003c\/th\u003e\n\u003cth\u003eChimney connector to side wall (D)\u003c\/th\u003e\n\u003cth\u003eStove body to corner wall (E)\u003c\/th\u003e\n\u003cth\u003eChimney connector to corner wall (F)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-wall connector, no rear heat shield\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003ctd\u003e16\" (41 cm)\u003c\/td\u003e\n\u003ctd\u003e21\" (54 cm)\u003c\/td\u003e\n\u003ctd\u003e25⅞\" (66 cm)\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003ctd\u003e25½\" (65 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-wall connector, included rear heat shield\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003ctd\u003e13¾\" (35 cm)\u003c\/td\u003e\n\u003ctd\u003e18¾\" (48 cm)\u003c\/td\u003e\n\u003ctd\u003e25⅞\" (66 cm)\u003c\/td\u003e\n\u003ctd\u003e7\" (18 cm)\u003c\/td\u003e\n\u003ctd\u003e17¼\" (44 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-wall connector, blower kit shield 96-57400\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003ctd\u003e13¾\" (35 cm)\u003c\/td\u003e\n\u003ctd\u003e18¾\" (48 cm)\u003c\/td\u003e\n\u003ctd\u003e25⅞\" (66 cm)\u003c\/td\u003e\n\u003ctd\u003e7\" (18 cm)\u003c\/td\u003e\n\u003ctd\u003e17¼\" (44 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble-wall connector, included rear heat shield\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003ctd\u003e9¾\" (25 cm)\u003c\/td\u003e\n\u003ctd\u003e14¾\" (38 cm)\u003c\/td\u003e\n\u003ctd\u003e25⅞\" (66 cm)\u003c\/td\u003e\n\u003ctd\u003e7\" (18 cm)\u003c\/td\u003e\n\u003ctd\u003e17¼\" (44 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble-wall connector, blower kit shield 96-57400\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003ctd\u003e9¾\" (25 cm)\u003c\/td\u003e\n\u003ctd\u003e14¾\" (38 cm)\u003c\/td\u003e\n\u003ctd\u003e25⅞\" (66 cm)\u003c\/td\u003e\n\u003ctd\u003e7\" (18 cm)\u003c\/td\u003e\n\u003ctd\u003e17¼\" (44 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eAlcove installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eAlcove Installation Configuration\u003c\/th\u003e\n\u003cth\u003eMeasurement\u003c\/th\u003e\n\u003cth\u003eRequired Dimension\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, included rear heat shield, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eStove body to side wall (A)\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, included rear heat shield, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eStove body to rear wall (B)\u003c\/td\u003e\n\u003ctd\u003e13¾\" (35 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, included rear heat shield, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eChimney connector to rear wall (C)\u003c\/td\u003e\n\u003ctd\u003e18¾\" (48 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, included rear heat shield, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eChimney connector to side wall (D)\u003c\/td\u003e\n\u003ctd\u003e25⅞\" (66 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, included rear heat shield, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eCorner measurements (E, F)\u003c\/td\u003e\n\u003ctd\u003eSee NFPA 211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, blower kit shield 96-57400, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eStove body to side wall (A)\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, blower kit shield 96-57400, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eStove body to rear wall (B)\u003c\/td\u003e\n\u003ctd\u003e13¾\" (35 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, blower kit shield 96-57400, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eChimney connector to rear wall (C)\u003c\/td\u003e\n\u003ctd\u003e18¾\" (48 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, blower kit shield 96-57400, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eChimney connector to side wall (D)\u003c\/td\u003e\n\u003ctd\u003e25⅞\" (66 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove, blower kit shield 96-57400, single- or double-wall connector\u003c\/td\u003e\n\u003ctd\u003eCorner measurements (E, F)\u003c\/td\u003e\n\u003ctd\u003eSee NFPA 211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove\u003c\/td\u003e\n\u003ctd\u003eMinimum alcove width\u003c\/td\u003e\n\u003ctd\u003e51¾\" (132 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove\u003c\/td\u003e\n\u003ctd\u003eMinimum alcove ceiling height from floor, single-wall connector\u003c\/td\u003e\n\u003ctd\u003e56\" (142.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove\u003c\/td\u003e\n\u003ctd\u003eMinimum alcove ceiling height from floor, double-wall connector\u003c\/td\u003e\n\u003ctd\u003e56\" (142.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcove\u003c\/td\u003e\n\u003ctd\u003eProtected surfaces\u003c\/td\u003e\n\u003ctd\u003eSee NFPA 211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eClearances to combustible surfaces may be reduced using an NFPA 211 approved wall protection system with the additional approval of the regulatory authority having jurisdiction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChimney connector clearances, through-the-wall or rear-exit arrangement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a top-flue installation venting through the wall, or a direct rear-flue installation, the manual publishes the following clearances from the stove and the vertical chimney connector to the rear combustible wall. These clearances pertain to all sides of the connection pipe. For stove side clearances, use the parallel installation clearances above.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector and Shield Configuration\u003c\/th\u003e\n\u003cth\u003eStove body or rear shield to rear combustible wall (A)\u003c\/th\u003e\n\u003cth\u003eVertical chimney connector to rear combustible wall (B)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-wall connector, no rear heat shield\u003c\/td\u003e\n\u003ctd\u003e15½\" (40 cm)\u003c\/td\u003e\n\u003ctd\u003e21\" (54 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-wall connector, included rear heat shield\u003c\/td\u003e\n\u003ctd\u003e13¾\" (35 cm)\u003c\/td\u003e\n\u003ctd\u003e18¾\" (48 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-wall connector, blower kit shield 96-57400\u003c\/td\u003e\n\u003ctd\u003e13¾\" (35 cm)\u003c\/td\u003e\n\u003ctd\u003e18¾\" (48 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble-wall connector, included rear heat shield\u003c\/td\u003e\n\u003ctd\u003e9¾\" (25 cm)\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble-wall connector, blower kit shield 96-57400\u003c\/td\u003e\n\u003ctd\u003e9¾\" (25 cm)\u003c\/td\u003e\n\u003ctd\u003e14\" (36 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eConnector ceiling clearances\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector Type\u003c\/th\u003e\n\u003cth\u003eCeiling Clearance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-wall connector to unprotected ceiling\u003c\/td\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-wall connector to protected ceiling\u003c\/td\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble-wall connector to ceiling\u003c\/td\u003e\n\u003ctd\u003eFollow the connector manufacturer's specifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTrim and mantel clearances\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eTrim or Mantel Measurement\u003c\/th\u003e\n\u003cth\u003eRequirement\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide trim clearance\u003c\/td\u003e\n\u003ctd\u003e6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMantel height above floor\u003c\/td\u003e\n\u003ctd\u003e48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum mantel depth\u003c\/td\u003e\n\u003ctd\u003e12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim thickness shown\u003c\/td\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCeiling clearance\u003c\/td\u003e\n\u003ctd\u003eRefer to the applicable connector and ceiling clearance requirements above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese trim and mantel clearances also apply when the stove is positioned in an applicable fireplace opening; however, the Craftsbury 8392 is not approved for installation in any factory-built fireplace.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHearth and floor protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCombustible flooring must be protected with a covering of noncombustible material, such as a continuous layer of tile, brick, slate, or glass. The Craftsbury 8392 does not require an insulated hearth pad and there is no R-value requirement; the requirement is ember protection.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry\u003c\/th\u003e\n\u003cth\u003eMinimum Floor Protection\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003ctd\u003e31½\" wide x 33\" deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003ctd\u003e40\" wide x 43\" deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eHearth Extension\u003c\/th\u003e\n\u003cth\u003eUnited States\u003c\/th\u003e\n\u003cth\u003eCanada\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront extension, measured from the edge of the fuel-door opening\u003c\/td\u003e\n\u003ctd\u003e16\" (41 cm)\u003c\/td\u003e\n\u003ctd\u003e18\" (46 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide extension\u003c\/td\u003e\n\u003ctd\u003e8\" (21 cm), measured from the edge of the fuel-door opening\u003c\/td\u003e\n\u003ctd\u003e8\" (21 cm), measured from the body of the stove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear extension, measured from the stove body to the rear edge of the hearth\u003c\/td\u003e\n\u003ctd\u003e2\" (6 cm)\u003c\/td\u003e\n\u003ctd\u003e2\" (6 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eHearthStone notes that luxury vinyl plank and luxury vinyl tile flooring warrants extra consideration, as some products begin to warp at 110° Fahrenheit, and that additional shielding may be necessary depending on the flooring used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation notice:\u003c\/strong\u003e Clearances and hearth requirements vary by connector type, shielding, and installation configuration. Refer to the current Craftsbury 8392 owner's and installation manual and applicable local requirements before installation.\u003c\/p\u003e\n\u003ch3\u003eIncluded Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCraftsbury Model 8392 woodstove with catalytic combustors installed\u003c\/li\u003e\n\u003cli\u003eOwner's manual with installation and operating instructions\u003c\/li\u003e\n\u003cli\u003eRear heat shield (part 5640-024), listed as included in the manual's replacement parts information\u003c\/li\u003e\n\u003cli\u003eShipping clips, used for permanent floor attachment where required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Accessories\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eAccessory\u003c\/th\u003e\n\u003cth\u003ePart ID\u003c\/th\u003e\n\u003cth\u003eMSRP\u003c\/th\u003e\n\u003cth\u003eCompatibility or Requirement Note\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlower \u0026amp; Reduced Clearance Heatshield Combo\u003c\/td\u003e\n\u003ctd\u003e96-57400\u003c\/td\u003e\n\u003ctd\u003e$649\u003c\/td\u003e\n\u003ctd\u003eConvection blower with its own reduced-clearance heat shield, which screws to the back of the stove and channels the air from the blower. The manual's clearance tables list the blower kit shield configuration separately from the included rear heat shield.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutside Air Starter\u003c\/td\u003e\n\u003ctd\u003e96-53400\u003c\/td\u003e\n\u003ctd\u003e$109\u003c\/td\u003e\n\u003ctd\u003eConnects the stove's air intake to a minimum 3\" diameter duct supplied by others. Required for mobile home installations. In Canada, the stove must be attached to the home's floor and a duct damper allowing 100% closure must be installed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\" to 4\" Outside Air Increaser\u003c\/td\u003e\n\u003ctd\u003e90-53308\u003c\/td\u003e\n\u003ctd\u003e$49\u003c\/td\u003e\n\u003ctd\u003eOptional adapter for a 4\" outside-air duct, used with outside air kit 96-53400.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll accessories listed above are optional and sold separately unless expressly stated otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eHearthStone warrants the appliance to the original retail purchaser only, when purchased by that purchaser and installed by an authorized HearthStone dealer or their designated representative, against defects in material or workmanship. Coverage begins on the date of the original invoice and is not transferable to subsequent owners.\u003c\/p\u003e\n\u003cp\u003eWarranty periods differ by component. HearthStone defines the term \"Limited Lifetime\" as 10 years from the beginning of warranty coverage, and applies it to the stone and to cast iron not listed elsewhere. Door handles and latches and steel components and the firebox carry a 5-year period. Appliance electrical components carry a 2-year period. Enamel finish against peeling or fading, glass, accessories, and all components not listed elsewhere carry a 1-year period. The catalytic combustors are covered directly by the combustor manufacturer, Applied Ceramics, under a separate limited warranty that provides free replacement within two years of purchase and prorated replacement pricing thereafter.\u003c\/p\u003e\n\u003cp\u003eHearthStone pays for warranty labor performed by an authorized dealer during the first year after the purchase date only when the appliance was installed by an authorized dealer or their designated representative; otherwise, and thereafter, labor is the purchaser's responsibility. Exclusions include over-firing, improper installation or operation, service by anyone other than an authorized dealer, use of unapproved fuels or components, water and corrosion damage, and normal wear parts such as paint, gaskets, baffles, refractory materials, and glass. Surface and hairline cracks and scratches in the stone that do not affect operation or safety are excluded, and HearthStone's obligation does not extend to the appliance's ability to heat a desired space. Warranty registration is not required as a condition of coverage. Refer to the complete warranty in the current Craftsbury 8392 owner's manual for the full terms, conditions, and limitations.\u003c\/p\u003e\n\u003ch3\u003eAbout HearthStone\u003c\/h3\u003e\n\u003cp\u003eHearthStone Quality Home Heating Products builds wood- and gas-burning hearth appliances in Morrisville, Vermont, and has been building industry-leading products since 1978. Its stoves are handcrafted by Vermont craftsmen from materials including heating-grade soapstone, cast iron produced at the company's own foundry in Spain, precision-made steel, and engineered ceramics. The company's TruHybrid™ system, used across its current wood stove line, adds catalytic tertiary combustion to primary and secondary combustion.\u003c\/p\u003e","brand":"Hearthstone Stoves","offers":[{"title":"Default Title","offer_id":53616226304276,"sku":"8392","price":3599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/9381\/2756\/files\/Craftsbury8392_room-brown_201013_01.webp?v=1786241580","url":"https:\/\/cozyglowstoves.com\/products\/hearthstone-stoves-craftsbury-freestanding-wood-stove","provider":"Cozy Glow Stoves","version":"1.0","type":"link"}