Drolet Deco Alto Wood Stove (DB03220)
A Tall, Streamlined EPA-Certified Wood Stove with Integrated Log Storage
A streamlined version of the traditional wood stove, the Drolet Deco Alto heats 500–2,100 ft² with up to 75,000 BTU/h, distinguished by its clean lines, higher-than-average 39 3/4" height, and pedestal base with integrated log storage.
Key Features
- Recommended heating area of 500–2,100 ft² with up to 75,000 BTU/h maximum heat output
- EPA 2020 certified non-catalytic combustion at 2.3 g/h particulate emissions
- 2.4 ft³ overall firebox accepting logs up to 20" with up to 8 hours of burn time
- Higher-than-average 39 3/4" profile with integrated log storage in the pedestal base
- Cast iron door with adjustable hinges and ceramic glass
- Heavy duty 5/16" steel top reinforced with a stainless steel heat shield
- Included pedestal with log storage, rear air deflector, ash lip, ash drawer, and air damper
Product Features
Streamlined Design with a Taller Profile
Standing 39 3/4" tall with clean, contemporary lines, the Deco Alto has a higher-than-average profile and a 25 5/8" x 26 1/2" footprint.
Integrated Log Storage Base
The pedestal base incorporates a storage space for a small supply of firewood, keeping the next logs organized and close at hand.
Heating Performance for 500–2,100 Square Feet
Rated to heat 500 to 2,100 ft², the Deco Alto provides up to 75,000 BTU/h of maximum heat output from its 2.4 ft³ firebox, subject to installation and operating conditions.
EPA 2020 Certified Clean Combustion
This large non-catalytic stove is EPA 2020 approved with an average particulate emission rate of 2.3 g/h, supported by a stainless steel secondary-air system for cleaner, more complete burns.
East-West Firebox with 20" Log Capacity
The 21" wide firebox loads over its width, accepts logs up to 20", and provides up to 8 hours of maximum burn time under applicable operating conditions.
Cast Iron Door with Adjustable Hinges
The single cast iron framed door features adjustable hinges and a 16 3/4" x 10 1/4" ceramic glass surface, kept clearer by the integrated glass airwash system.
Certified Installation Versatility
The Deco Alto is certified for alcove installation and for mobile homes when equipped with a fresh air intake, installed according to the manufacturer's instructions, and an optional blower can be added for increased air circulation.
Product Specifications
Appliance Performance
| Specification |
Value |
| Fuel Type |
Dry cordwood (16" recommended) |
| Recommended Heating Area |
500 – 2,100 ft² |
| Overall Firebox Volume |
2.4 ft³ |
| EPA Loading Volume |
1.95 ft³ |
| Maximum Burn Time |
8 h |
| Maximum Heat Output – Dry Cordwood |
75,000 BTU/h (22 kW) |
| Minimum Overall Heat Output Rate |
14,200 BTU/h (4.16 kW) |
| Maximum Overall Heat Output Rate |
44,500 BTU/h (13.04 kW) |
| Average Overall Efficiency – Dry Cordwood (HHV) |
72% |
| Average Overall Efficiency – Dry Cordwood (LHV) |
77% |
| Optimum Efficiency |
79% |
| Optimum Heat Transfer Efficiency |
76% |
| Average Particulate Emission Rate |
2.3 g/h |
| Average CO Output |
69 g/h |
General Features
| Feature |
Specification |
| Size Category |
Large |
| Combustion Technology |
Non-catalytic |
| High-Efficiency Certified Appliance |
Yes, EPA 2020 approved |
| Premium Quality Blower (CFM) |
Optional |
| Stainless Steel Secondary-Air System |
Yes |
| Door Type |
Single, glass with cast iron frame |
| Glass Type |
Ceramic glass |
| Glass Surface (W x H) |
16 3/4" x 10 1/4" |
| Steel Thickness – Body |
3/16" |
| Steel Thickness – Top |
5/16" |
| Log Positioning |
Loading over width |
| Maximum Log Length |
20" |
| Firebox Lined with Refractory Bricks |
Yes |
| Baffle Type |
High quality vermiculite |
| Warranty |
Limited lifetime |
Dimensions and Weight
| Measurement |
Size |
| Overall Width |
25 5/8" |
| Overall Height |
39 3/4" |
| Overall Depth |
26 1/2" |
| Door Opening (Width) |
17 1/2" |
| Door Opening (Height) |
9" |
| Firebox Size (Width) |
21" |
| Firebox Size (Height) |
11 7/8" |
| Firebox Size (Depth) |
16 1/2" |
| Shipping Weight |
390 lb (177 kg) |
Venting and Chimney Requirements
| Specification |
Requirement |
| Flue Outlet Diameter |
6" |
| Distance – Center of Flue Outlet to Back of Unit |
7 3/8" |
| Distance – Center of Flue Outlet to Side of Unit |
12 7/8" |
| Recommended Chimney Diameter |
6" |
| Type of Chimney |
CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum Chimney Height |
12' |
Certifications and Installation
| Category |
Standard |
| Certified According to Applicable Standards |
By an accredited laboratory (CAN/USA) |
| Canadian Standard (Emissions) |
CSA B415.1-10 |
| USA Standard (Emissions) |
EPA |
| Canadian Standard (Safety) |
ULC S627 |
| USA Standard (Safety) |
UL 1482, UL 737 |
| Mobile Home Approved |
Yes, with fresh air intake |
| Alcove Installation Approved |
Yes |
Minimum Clearances to Combustibles*
| Location |
Canada (Single Wall / Double Wall) |
USA (Single Wall / Double Wall) |
| Back Wall |
14 1/2" / 6" |
11" / 6" |
| Corner |
12" / 12" |
12" / 12" |
| Side Wall |
22" / 22" |
22" / 22" |
| Base of the Unit to Ceiling** |
84" / 84" |
84" / 84" |
*The certification label on the appliance and the current installation manual supersede published dimensions and clearances. Always follow the manufacturer’s installation instructions and applicable local codes.
**Some appliances have been tested with a low ceiling; refer to the installation manual before setting up the unit.
Manufacturer Notes
- Recommended heating area and maximum burn time may vary with location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables.
- Maximum heat output (dry cordwood) is based on a loading density of 15–20 lb/ft³; other performance figures are based on the standard test fuel load of 7–12 lb/ft³ at 19–25% moisture content.
- Efficiency values are measured per the CSA B415.1-10 stack loss method; optimum heat transfer efficiency reflects the low burn rate (HHV).
- Any installation must be done according to the data and drawings detailed in the owner’s manual.
About the Manufacturer
Who Is Drolet?
Drolet is a Canadian hearth manufacturer whose history dates back to 1875, when François-Xavier Drolet opened his first workshop in Quebec. Today the brand produces wood stoves, fireplace inserts, pellet stoves, furnaces, and cookstoves recognized for durability and practical heating performance.
Performance and Certification Focus
Drolet appliances are designed to meet demanding environmental and industry standards, with current wood-burning models certified to EPA 2020 emissions requirements and tested by accredited laboratories for use in both the United States and Canada.
Manufacturing and Support
Drolet appliances are proudly made in Canada and the USA. The manufacturer supports owners through online warranty registration, replacement-parts resources, and dedicated technical support.
Skip to content
Recommended Heating Area by Climate Zone