Englander Blue Ridge 300P Wood Stove with Pedestal Base (ESW0007)
A Large EPA-Certified Wood Stove on a Pedestal with Ash Drawer
The Englander Blue Ridge 300P heats 500–2,100 ft² with up to 75,000 BTU/h from a 2.4 ft³ firebox and includes a pedestal, ash drawer and lip, air intake damper, and rear air deflector.
Key Features
- Recommended heating area of 500–2,100 ft² with up to 75,000 BTU/h maximum heat output
- EPA 2020 certified non-catalytic combustion at 2.3 g/h particulate emissions
- 2.4 ft³ firebox accepting logs up to 20" oriented east-west, with up to 8 hours of burn time
- Top heat exchanger that redirects heat to the front of the unit
- Steel top reinforced with a stainless steel heat shield
- Cast iron door with 14 7/8" x 9 1/4" ceramic glass and glass airwash system
- Included pedestal, ash drawer and lip, air intake damper, and rear air deflector
- Proudly made in USA and Canada
Product Features
Heating Performance for 500–2,100 Square Feet
Rated to heat 500 to 2,100 ft², the Blue Ridge 300P provides up to 75,000 BTU/h of maximum heat output from its 2.4 ft³ firebox, subject to installation and operating conditions.
EPA 2020 Certified Clean Combustion
This large non-catalytic stove is EPA 2020 approved with an average particulate emission rate of 2.3 g/h and uses a stainless steel secondary-air system to support more complete combustion.
Top Heat Exchanger
The unit is equipped with a top heat exchanger that redirects heat to the front of the unit, and its steel top is separately reinforced with a stainless steel heat shield.
East-West Firebox with 20" Log Capacity
The 21" wide firebox loads logs over its width, accepts logs up to 20" oriented east-west, and provides up to 8 hours of burn time under applicable operating conditions.
Cast Iron Door with Airwash System
The single cast iron framed door carries a 14 7/8" x 9 1/4" ceramic glass surface, kept clearer by the integrated glass airwash system.
Pedestal Base with Ash Drawer
The included pedestal integrates an ash drawer and ash lip for simpler cleanup between burns.
Certified Installation Versatility
The Blue Ridge 300P is certified for alcove installation and for mobile homes when equipped with a fresh air intake, installed according to the manufacturer's instructions, and an optional 100 CFM blower can be added for increased air circulation.
Product Specifications
Appliance Performance
| Specification |
Value |
| Fuel Type |
Dry cordwood (16" recommended) |
| Heating Area |
500 – 2,100 ft² |
| Overall Firebox Volume |
2.4 ft³ |
| EPA Loading Volume |
1.95 ft³ |
| Maximum Burn Time |
8 h |
| Maximum Heat Output – Dry Cordwood |
75,000 BTU/h (22 kW) |
| Minimum Overall Heat Output Rate |
14,200 BTU/h (4.16 kW) |
| Maximum Overall Heat Output Rate |
44,500 BTU/h (13.04 kW) |
| Average Overall Efficiency – Dry Cordwood (HHV) |
72% |
| Average Overall Efficiency – Dry Cordwood (LHV) |
77% |
| Optimum Efficiency |
79% |
| Optimum Heat Transfer Efficiency |
76% |
| Average Particulate Emission Rate |
2.3 g/h |
| Average CO Output |
69 g/h |
General Features
| Feature |
Specification |
| Combustion Technology |
Non-catalytic |
| High-Efficiency Certified Appliance |
Yes, EPA 2020 approved |
| Premium Quality Blower (CFM) |
Optional |
| Stainless Steel Secondary-Air System |
Yes |
| Door Type |
Single, glass with cast iron frame |
| Glass Type |
Ceramic glass |
| Glass Surface (W x H) |
14 7/8" x 9 1/4" |
| Steel Thickness – Body |
3/16" |
| Steel Thickness – Top |
5/16" |
| Log Positioning |
Loading over width |
| Maximum Log Length |
20" oriented East-West |
| Firebox Lined with Refractory Bricks |
Yes |
| Baffle Type |
High quality vermiculite |
| Warranty |
5 years limited |
Dimensions and Weight
| Measurement |
Size |
| Overall Width |
25 1/2" |
| Overall Height |
33 1/4" |
| Overall Depth |
28" |
| Door Opening (Width) |
17 1/2" |
| Door Opening (Height) |
9" |
| Firebox Size (Width) |
21" |
| Firebox Size (Height) |
12" |
| Firebox Size (Depth) |
16 1/2" |
| Shipping Weight |
365 lb (165 kg) |
Venting and Chimney Requirements
| Specification |
Requirement |
| Flue Outlet Diameter |
6" |
| Distance – Center of Flue Outlet to Back of Unit |
6 1/2" |
| Distance – Center of Flue Outlet to Side of Unit |
12 3/4" |
| Recommended Chimney Diameter |
6" |
| Type of Chimney |
ULC-S629, UL 103 HT (2100 °F) |
| Minimum Chimney Height |
12' |
Certifications and Installation
| Category |
Standard |
| Certified According to Applicable Standards |
By an accredited laboratory (CAN/USA) |
| Canadian Standard (Emissions) |
CSA B415.1-10 |
| USA Standard (Emissions) |
EPA |
| Canadian Standard (Safety) |
ULC S627 |
| USA Standard (Safety) |
UL 1482, UL 737 |
| Mobile Home Approved |
Yes, with fresh air intake |
| Alcove Installation Approved |
Yes |
Minimum Clearances to Combustibles*
| Location |
Canada (Single Wall / Double Wall) |
USA (Single Wall / Double Wall) |
| Back Wall |
14 1/2" / 6" |
11" / 6" |
| Side Wall |
22" / 22" |
22" / 22" |
| Corner |
12" / 12" |
12" / 12" |
| Base of the Unit to Ceiling** |
84" / 84" |
84" / 84" |
*The certification label on the appliance and the current installation manual supersede published dimensions and clearances. Always follow the manufacturer’s installation instructions and applicable local codes.
**Some appliances have been tested with a low ceiling; refer to the installation manual before setting up the unit.
Manufacturer Notes
- Recommended heating area and maximum burn time may vary with location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables.
- Efficiency and emission figures are measured under the applicable certification test methods; see the owner’s manual for details.
- Any installation must be done according to the data and drawings detailed in the owner’s manual.
About the Manufacturer
Practical Wood Heating Since 1976
Englander wood stoves have been proudly made in the US since 1976, with a focus on simple, reliable, and robust heaters built for everyday wood heating.
Blue Ridge Design and Certification
Blue Ridge series wood stoves use non-catalytic combustion with stainless steel secondary-air systems and are certified by an accredited laboratory to the applicable United States and Canadian emissions and safety standards published for each model, including EPA 2020 requirements.
Manufacturing and Support
Englander publishes installation and operation manuals, appliance dimension drawings, and replacement-parts resources for each model, and supports owners through its customer service and dedicated technical support lines.
Skip to content
Recommended Heating Area by Climate Zone