Drolet Blackcomb II Wood Stove (DB02811)
A Medium-Size EPA-Certified Wood Stove with Reduced-Clearance Side Panels
Of medium size, the Drolet Blackcomb II heats 500–1,800 ft² with up to 65,000 BTU/h, equipped with side panels to reduce clearances to combustible materials and a top air deflector to boost air movement through the room.
Key Features
- Recommended heating area of 500–1,800 ft² with up to 65,000 BTU/h maximum heat output
- EPA 2020 certified non-catalytic combustion at 2.4 g/h particulate emissions
- 1.86 ft³ overall firebox accepting logs up to 18" with up to 7 hours of burn time
- Side panels reduce clearances to combustible materials
- Top air deflector boosts air movement through the room
- Heavy duty 5/16" steel top reinforced with a stainless steel heat shield
- Included pedestal with ash drawer, top air deflector, ceramic glass, side panels, ash lip, and air damper
Product Features
Heating Performance for 500–1,800 Square Feet
Rated to heat 500 to 1,800 ft², the Blackcomb II provides up to 65,000 BTU/h of maximum heat output from its 1.86 ft³ firebox, subject to installation and operating conditions.
EPA 2020 Certified Clean Combustion
This non-catalytic stove is EPA 2020 approved with an average particulate emission rate of 2.4 g/h and uses a stainless steel secondary-air system to support more complete combustion.
Reduced Clearances with Factory Side Panels
Integrated side panels reduce the required clearances to combustible materials — the published side wall clearance is 10" — helping this medium-size stove fit installations where wall spacing is limited, when installed per the owner's manual.
Top Air Deflector for Better Air Movement
The included top air deflector boosts air movement through the room, and an optional blower can be added for further circulation.
East-West Firebox with 18" Log Capacity
The 19 5/8" wide firebox loads over its width, accepts logs up to 18", and provides up to 7 hours of maximum burn time under applicable operating conditions.
Pedestal Base with Ash Drawer
The included pedestal integrates an ash drawer for simpler cleanup, and the glass airwash system helps keep the 15 3/4" x 9 3/4" ceramic glass clearer for a better view of the fire.
Certified Installation Versatility
The Blackcomb II is certified for alcove installation and for mobile homes when equipped with a fresh air intake, installed according to the manufacturer's instructions.
Product Specifications
Appliance Performance
| Specification |
Value |
| Fuel Type |
Dry cordwood (16" recommended) |
| Recommended Heating Area |
500 – 1,800 ft² |
| Overall Firebox Volume |
1.86 ft³ |
| EPA Loading Volume |
1.44 ft³ |
| Maximum Burn Time |
7 h |
| Maximum Heat Output – Dry Cordwood |
65,000 BTU/h (19 kW) |
| Minimum Overall Heat Output Rate |
9,800 BTU/h (2.87 kW) |
| Maximum Overall Heat Output Rate |
52,200 BTU/h (15.3 kW) |
| Average Overall Efficiency – Dry Cordwood (HHV) |
68% |
| Average Overall Efficiency – Dry Cordwood (LHV) |
73% |
| Optimum Efficiency |
76% |
| Optimum Heat Transfer Efficiency |
75% |
| Average Particulate Emission Rate |
2.4 g/h |
| Average CO Output |
103 g/h |
General Features
| Feature |
Specification |
| Size Category |
Medium |
| Combustion Technology |
Non-catalytic |
| High-Efficiency Certified Appliance |
Yes, EPA 2020 approved |
| Premium Quality Blower (CFM) |
Optional |
| Stainless Steel Secondary-Air System |
Yes |
| Door Type |
Single, glass with cast iron frame |
| Glass Type |
Ceramic glass |
| Glass Surface (W x H) |
15 3/4" x 9 3/4" |
| Steel Thickness – Body |
3/16" |
| Steel Thickness – Top |
5/16" |
| Log Positioning |
Loading over width |
| Maximum Log Length |
18" |
| Firebox Lined with Refractory Bricks |
Yes |
| Baffle Type |
High quality vermiculite |
| Warranty |
Limited lifetime |
Dimensions and Weight
| Measurement |
Size |
| Overall Width |
24 7/8" |
| Overall Height |
30 5/8" |
| Overall Depth |
24 7/8" |
| Door Opening (Width) |
17 1/4" |
| Door Opening (Height) |
8" |
| Firebox Size (Width) |
19 5/8" |
| Firebox Size (Height) |
11 7/8" |
| Firebox Size (Depth) |
13 1/2" |
| Shipping Weight |
325 lb (147 kg) |
Venting and Chimney Requirements
| Specification |
Requirement |
| Flue Outlet Diameter |
6" |
| Distance – Center of Flue Outlet to Back of Unit |
7 1/2" |
| Distance – Center of Flue Outlet to Side of Unit |
12 1/2" |
| Recommended Chimney Diameter |
6" |
| Type of Chimney |
CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum Chimney Height |
12' |
Certifications and Installation
| Category |
Standard |
| Certified According to Applicable Standards |
By an accredited laboratory (CAN/USA) |
| Canadian Standard (Emissions) |
CSA B415.1-10 |
| USA Standard (Emissions) |
EPA |
| Canadian Standard (Safety) |
ULC-S627 |
| USA Standard (Safety) |
UL 1482, UL 737 |
| Mobile Home Approved |
Yes, with fresh air intake |
| Alcove Installation Approved |
Yes |
Minimum Clearances to Combustibles*
| Location |
Canada (Single Wall / Double Wall) |
USA (Single Wall / Double Wall) |
| Back Wall |
14 1/2" / 7 1/2" |
13" / 7 1/2" |
| Corner |
12" / 12" |
12" / 12" |
| Side Wall |
10" / 10" |
10" / 10" |
| Base of the Unit to Ceiling** |
84" / 84" |
84" / 84" |
*The certification label on the appliance and the current installation manual supersede published dimensions and clearances. Always follow the manufacturer’s installation instructions and applicable local codes.
**Some appliances have been tested with a low ceiling; refer to the installation manual before setting up the unit.
Manufacturer Notes
- Recommended heating area and maximum burn time may vary with location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables.
- Maximum heat output (dry cordwood) is based on a loading density of 15–20 lb/ft³; other performance figures are based on the standard test fuel load of 7–12 lb/ft³ at 19–25% moisture content.
- Efficiency values are measured per the CSA B415.1-10 stack loss method; optimum heat transfer efficiency reflects the low burn rate (HHV).
- Any installation must be done according to the data and drawings detailed in the owner’s manual.
About the Manufacturer
Who Is Drolet?
Drolet is a Canadian hearth manufacturer whose history dates back to 1875, when François-Xavier Drolet opened his first workshop in Quebec. Today the brand produces wood stoves, fireplace inserts, pellet stoves, furnaces, and cookstoves recognized for durability and practical heating performance.
Performance and Certification Focus
Drolet appliances are designed to meet demanding environmental and industry standards, with current wood-burning models certified to EPA 2020 emissions requirements and tested by accredited laboratories for use in both the United States and Canada.
Manufacturing and Support
Drolet appliances are proudly made in Canada and the USA. The manufacturer supports owners through online warranty registration, replacement-parts resources, and dedicated technical support.
Skip to content
Recommended Heating Area by Climate Zone