Drolet Deco Nano Wood Stove (DB03215)
A Compact, Tall-Profile EPA-Certified Wood Stove with Under-Stove Log Storage
The Drolet Deco Nano heats 250–1,200 ft² with up to 45,000 BTU/h, standing out with its modern design, higher-than-average height, practical log storage under the appliance, and a deeper firebox bottom that collects more ash between cleanings.
Key Features
- Recommended heating area of 250–1,200 ft² with up to 45,000 BTU/h maximum heat output
- EPA 2020 certified non-catalytic combustion at 1.8 g/h particulate emissions
- 1.8 ft³ overall firebox accepting logs up to 17" with up to 5 hours of burn time
- Higher-than-average 32 1/2" profile with log storage in the pedestal base
- Deeper firebox bottom allows greater ash accumulation between cleanings
- Glass airwash system for a cleaner view of the flames
- Included pedestal with log storage, top air deflector, ceramic glass, cast iron door with adjustable hinges, ash lip, air damper, and stainless steel heat shield
Product Features
Compact Footprint with a Taller Profile
At 18 1/2" wide and 32 1/2" tall, the Deco Nano pairs a narrow, space-saving footprint with a higher-than-average modern profile and clean, contemporary lines.
Integrated Under-Stove Log Storage
The pedestal base incorporates a storage space for a small supply of firewood, keeping the next logs organized and close at hand.
Heating Performance for 250–1,200 Square Feet
Rated to heat 250 to 1,200 ft², the Deco Nano provides up to 45,000 BTU/h of maximum heat output from its 1.8 ft³ firebox, subject to installation and operating conditions.
EPA 2020 Certified Clean Combustion
This non-catalytic stove is EPA 2020 approved with an average particulate emission rate of 1.8 g/h, supported by a stainless steel secondary-air system for more complete combustion.
Deep Firebox with Extended Ash Capacity
The bottom of the combustion chamber is deeper than other models in its category, allowing a greater accumulation of ashes so the firebox can be emptied less frequently.
North-South Firebox with 17" Log Capacity
The 19 1/8" deep firebox loads over its depth, accepts logs up to 17", and provides up to 5 hours of maximum burn time under applicable operating conditions.
Certified Installation Versatility
The Deco Nano is certified for alcove installation and for mobile homes when equipped with a fresh air intake, installed according to the manufacturer's instructions, and an optional blower can be added for increased air circulation.
Product Specifications
Appliance Performance
| Specification |
Value |
| Fuel Type |
Dry cordwood (16" recommended) |
| Recommended Heating Area |
250 – 1,200 ft² |
| Overall Firebox Volume |
1.8 ft³ |
| EPA Loading Volume |
1.55 ft³ |
| Maximum Burn Time |
5 h |
| Maximum Heat Output – Dry Cordwood |
45,000 BTU/h (13.19 kW) |
| Minimum Overall Heat Output Rate |
12,124 BTU/h (3.55 kW) |
| Maximum Overall Heat Output Rate |
26,700 BTU/h (7.83 kW) |
| Average Overall Efficiency – Dry Cordwood (HHV) |
74% |
| Average Overall Efficiency – Dry Cordwood (LHV) |
79% |
| Optimum Efficiency |
80% |
| Optimum Heat Transfer Efficiency |
79% |
| Average Particulate Emission Rate |
1.8 g/h |
| Average CO Output |
74 g/h |
General Features
| Feature |
Specification |
| Size Category |
Small |
| Combustion Technology |
Non-catalytic |
| High-Efficiency Certified Appliance |
Yes, EPA 2020 approved |
| Premium Quality Blower (CFM) |
Optional |
| Stainless Steel Secondary-Air System |
Yes |
| Door Type |
Single, glass with cast iron frame |
| Glass Type |
Ceramic glass |
| Glass Surface (W x H) |
10 1/4" x 8 3/4" |
| Steel Thickness – Body |
3/16" |
| Steel Thickness – Top |
1/4" |
| Log Positioning |
Loading over depth |
| Maximum Log Length |
17" |
| Firebox Lined with Refractory Bricks |
Yes |
| Baffle Type |
High quality vermiculite |
| Warranty |
Limited lifetime |
Dimensions and Weight
| Measurement |
Size |
| Overall Width |
18 1/2" |
| Overall Height |
32 1/2" |
| Overall Depth |
29 1/8" |
| Door Opening (Width) |
12" |
| Door Opening (Height) |
7 5/8" |
| Firebox Size (Width) |
14 1/4" |
| Firebox Size (Height) |
11 3/4" |
| Firebox Size (Depth) |
19 1/8" |
| Shipping Weight |
281 lb (128 kg) |
Venting and Chimney Requirements
| Specification |
Requirement |
| Flue Outlet Diameter |
6" |
| Distance – Center of Flue Outlet to Back of Unit |
6 5/8" |
| Distance – Center of Flue Outlet to Side of Unit |
9 1/4" |
| Recommended Chimney Diameter |
6" |
| Type of Chimney |
CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum Chimney Height |
12' |
Certifications and Installation
| Category |
Standard |
| Certified According to Applicable Standards |
By an accredited laboratory (CAN/USA) |
| Canadian Standard (Emissions) |
CSA B415.1-10 |
| USA Standard (Emissions) |
EPA |
| Canadian Standard (Safety) |
ULC S627 |
| USA Standard (Safety) |
UL 1482, UL 737 |
| Mobile Home Approved |
Yes, with fresh air intake |
| Alcove Installation Approved |
Yes |
Minimum Clearances to Combustibles*
| Location |
Canada (Single Wall / Double Wall) |
USA (Single Wall / Double Wall) |
| Back Wall |
14" / 6" |
12" / 6" |
| Corner |
11" / 7" |
11" / 7" |
| Side Wall |
18" / 18" |
18" / 18" |
| Base of the Unit to Ceiling** |
84" / 84" |
84" / 84" |
*The certification label on the appliance and the current installation manual supersede published dimensions and clearances. Always follow the manufacturer’s installation instructions and applicable local codes.
**Some appliances have been tested with a low ceiling; refer to the installation manual before setting up the unit.
Manufacturer Notes
- Recommended heating area and maximum burn time may vary with location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables.
- Maximum heat output (dry cordwood) is based on a loading density of 15–20 lb/ft³; other performance figures are based on the standard test fuel load of 7–12 lb/ft³ at 19–25% moisture content.
- Efficiency values are measured per the CSA B415.1-10 stack loss method; optimum heat transfer efficiency reflects the low burn rate (HHV).
- Any installation must be done according to the data and drawings detailed in the owner’s manual.
About the Manufacturer
Who Is Drolet?
Drolet is a Canadian hearth manufacturer whose history dates back to 1875, when François-Xavier Drolet opened his first workshop in Quebec. Today the brand produces wood stoves, fireplace inserts, pellet stoves, furnaces, and cookstoves recognized for durability and practical heating performance.
Performance and Certification Focus
Drolet appliances are designed to meet demanding environmental and industry standards, with current wood-burning models certified to EPA 2020 emissions requirements and tested by accredited laboratories for use in both the United States and Canada.
Manufacturing and Support
Drolet appliances are proudly made in Canada and the USA. The manufacturer supports owners through online warranty registration, replacement-parts resources, and dedicated technical support.
Skip to content
Recommended Heating Area by Climate Zone