Drolet Escape 1500 Wood Stove (DB03135)
A Medium-Size EPA-Certified Wood Stove on Pedestal with Ash Drawer
The Drolet Escape 1500 is a medium-size, non-catalytic wood stove on a pedestal base that heats 500–1,800 ft² with up to 65,000 BTU/h, pairing reduced-clearance side panels with a top heat exchanger.
Key Features
- Recommended heating area of 500–1,800 ft² with up to 65,000 BTU/h maximum heat output
- EPA 2020 certified non-catalytic combustion at 2.4 g/h particulate emissions
- 1.86 ft³ overall firebox accepting logs up to 18" with up to 7 hours of burn time
- Side panels reduce clearances to combustible materials
- Top heat exchanger redirects heat toward the front of the unit
- Heavy duty 5/16" steel top reinforced with a stainless steel heat shield
- Included pedestal with ash drawer, air mate, ash lip, and air damper
Product Features
Medium-Size Zone Heating Performance
Rated for 500 to 1,800 ft² with a maximum heat output of 65,000 BTU/h, the Escape 1500 suits living areas, cottages, and open spaces that need a dependable supplemental wood heat source.
EPA 2020 Certified Clean Combustion
This non-catalytic stove is EPA 2020 approved with an average particulate emission rate of 2.4 g/h, using a stainless steel secondary-air system for cleaner, more complete burns.
Reduced Clearances with Factory Side Panels
Integrated side panels reduce the required clearances to combustible materials, helping the Escape 1500 fit installations where wall spacing is limited, when installed per the owner's manual.
Top Heat Exchanger and Optional Blower
A top heat exchanger redirects heat toward the front of the unit, and an optional blower can be added to further increase warm-air circulation through the room.
Pedestal Base with Ash Drawer
The included pedestal integrates an ash drawer for simpler cleanup, and the glass airwash system helps keep the ceramic glass clearer for a better view of the flames.
East-West Firebox with 18" Log Capacity
The 19 5/8" wide firebox loads over its width and accepts logs up to 18", delivering up to 7 hours of burn time from a single load.
Durable Steel and Cast Iron Construction
Built with a 3/16" steel body, a heavy duty 5/16" steel top reinforced with a stainless steel heat shield, a refractory brick-lined firebox, and a single glass door with cast iron frame, backed by a limited lifetime warranty.
Product Specifications
Appliance Performance
| Specification |
Value |
| Fuel Type |
Dry cordwood (16" recommended) |
| Recommended Heating Area |
500 – 1,800 ft² |
| Overall Firebox Volume |
1.86 ft³ |
| EPA Loading Volume |
1.44 ft³ |
| Maximum Burn Time |
7 h |
| Maximum Heat Output – Dry Cordwood |
65,000 BTU/h (19 kW) |
| Minimum Overall Heat Output Rate |
9,800 BTU/h (2.87 kW) |
| Maximum Overall Heat Output Rate |
52,200 BTU/h (15.3 kW) |
| Average Overall Efficiency – Dry Cordwood (HHV) |
68% |
| Average Overall Efficiency – Dry Cordwood (LHV) |
73% |
| Optimum Efficiency |
76% |
| Optimum Heat Transfer Efficiency |
75% |
| Average Particulate Emission Rate |
2.4 g/h |
| Average CO Output |
103 g/h |
General Features
| Feature |
Specification |
| Size Category |
Medium |
| Combustion Technology |
Non-catalytic |
| High-Efficiency Certified Appliance |
Yes, EPA 2020 approved |
| Premium Quality Blower (CFM) |
Optional |
| Stainless Steel Secondary-Air System |
Yes |
| Door Type |
Single, glass with cast iron frame |
| Glass Type |
Ceramic glass |
| Glass Surface (W x H) |
15 3/4" x 9 3/4" |
| Steel Thickness – Body |
3/16" |
| Steel Thickness – Top |
5/16" |
| Log Positioning |
Loading over width |
| Maximum Log Length |
18" |
| Firebox Lined with Refractory Bricks |
Yes |
| Baffle Type |
High quality vermiculite |
| Warranty |
Limited lifetime |
Dimensions and Weight
| Measurement |
Size |
| Overall Width |
24 7/8" |
| Overall Height |
29 7/8" |
| Overall Depth |
24 1/2" |
| Door Opening (Width) |
17 1/4" |
| Door Opening (Height) |
8" |
| Firebox Size (Width) |
19 5/8" |
| Firebox Size (Height) |
11 7/8" |
| Firebox Size (Depth) |
13 1/2" |
| Shipping Weight |
332 lb (151 kg) |
Venting and Chimney Requirements
| Specification |
Requirement |
| Flue Outlet Diameter |
6" |
| Distance – Center of Flue Outlet to Back of Unit |
7 1/2" |
| Distance – Center of Flue Outlet to Side of Unit |
12 1/2" |
| Recommended Chimney Diameter |
6" |
| Type of Chimney |
CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum Chimney Height |
12' |
Certifications and Installation
| Category |
Standard |
| Certified According to Applicable Standards |
By an accredited laboratory (CAN/USA) |
| Canadian Standard (Emissions) |
CSA B415.1-10 |
| USA Standard (Emissions) |
EPA |
| Canadian Standard (Safety) |
ULC S627 |
| USA Standard (Safety) |
UL 1482, UL 737 |
| Mobile Home Approved |
Yes, with fresh air intake |
| Alcove Installation Approved |
Yes |
Minimum Clearances to Combustibles*
| Location |
Canada (Single Wall / Double Wall) |
USA (Single Wall / Double Wall) |
| Back Wall |
14 1/2" / 6" |
13" / 6" |
| Corner |
12" / 6" |
12" / 6" |
| Side Wall |
10" / 10" |
10" / 10" |
| Base of the Unit to Ceiling** |
84" / 84" |
84" / 84" |
*The certification label on the appliance and the current installation manual supersede published dimensions and clearances. Always follow the manufacturer’s installation instructions and applicable local codes.
**Some appliances have been tested with a low ceiling; refer to the installation manual before setting up the unit.
Manufacturer Notes
- Recommended heating area and maximum burn time may vary with location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables.
- Maximum heat output (dry cordwood) is based on a loading density of 15–20 lb/ft³; other performance figures are based on the standard test fuel load of 7–12 lb/ft³ at 19–25% moisture content.
- Efficiency values are measured per the CSA B415.1-10 stack loss method; optimum heat transfer efficiency reflects the low burn rate (HHV).
- Any installation must be done according to the data and drawings detailed in the owner’s manual.
About the Manufacturer
Who Is Drolet?
Drolet is a Canadian hearth manufacturer whose history dates back to 1875, when François-Xavier Drolet opened his first workshop in Quebec. Today the brand produces wood stoves, fireplace inserts, pellet stoves, furnaces, and cookstoves recognized for durability and practical heating performance.
Performance and Certification Focus
Drolet appliances are designed to meet demanding environmental and industry standards, with current wood-burning models certified to EPA 2020 emissions requirements and tested by accredited laboratories for use in both the United States and Canada.
Manufacturing and Support
Drolet appliances are proudly made in Canada and the USA. The manufacturer supports owners through online warranty registration, replacement-parts resources, and dedicated technical support.
Skip to content
Recommended Heating Area by Climate Zone